| Model Name DGS60-A1A01024 Part No. 1032280 Mechanical data Shaft diameter: 6 mm x 10 mm Moment of inertia of the rotor: 13 gcm² Max. angular acceleration: 5 x 10^5 rad/s² Start up torque with shaft seal: 1.5 Ncm (20 °C) Start up torque without shaft seal: 0.2 Ncm (20 °C) Mechanical interface: Solid shaft, Servo flange Mass: 0.3 kg (for an encoder with connector outlet) Operating torque with shaft seal: 1 Ncm (20 °C) Operating torque without shaft seal: 0.1 Ncm (20 °C) Permissible shaft loading radial/axial: 20 N, 10 N Maximum operating speed without shaft seal: 10,000 1/min 1) Maximum operating speed with shaft seal: 6,000 1/min Bearing lifetime: 3.6 x 10^10 revolutions 1) At speeds > 600 rpm the shaft seal musst be removed Electrical data Connection type: Connector, M23, 12-pin, radial Reference signal, number: 1 Reference signal, position: 90 °, electronically, gated with A and B Electrical interface: 4 V ... 6 V, TTL/RS422 Operating power consumption (no load): 120 mA Supply voltage: 4 V ... 6 V Load current: 20 mA Maximum output frequency: 600 kHz Ambient data Resistance to shocks: 30 g, 11 ms (EN 60068-2-27) Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6) EMC: EN 61000-6-2, EN 61000-6-3 Protection class housing side with connector outlet: IP 65 1) Protection class housing side with cable outlet: IP 67 Protection class shaft side: IP 65 Protection class standard: IEC 60529 Air humidity: 90 % 2) Working temperature range: -20 °C ... 85 °C Storage temperature range: -30 °C ... 85 °C 1) With mating connector fitted 2) Condensation of the optical scanning not permitted System data Measuring step: 90 °, electronically/number of lines Measuring step deviation: 0.044 ° Number of lines per revolution: 1,024 Error limits: 0.098 ° |
